695XL Petrol-Powered Concrete Chain Saw
Deep Cutting, Petrol Powered Saw
Built to meet the operation and flexibility demands of the general construction user, the 680ES stands alone in terms of reliability and value. Easy to start with a new multifunction lever to control choke, run, and stop functions. The distinctive black powerhead houses specially designed carburetion and ignition systems that work together to ensure easy starting, cooler operation and dependable performance at just about any elevation. Available with 16-inch (40 cm) guidebars and the entire line of Force3-35 series diamond chain.
FEATURES AND BENEFITS
-
Polyester air filter designed specifically for wet cutting
-
Operates FORCE3™ bar and chain consumables up to 16” (40cm)
-
Multifunction lever controls choke, throttle advance, run and stop modes
-
Extended drive sprocket adapter offers easy chain assembly
-
Deep cutting solution for obstructed or small openings
-
Cut squares as small as 4” x 4” (10 cm x 10 cm)
-
Easy-to-start in all weather
TECHNICAL SPECIFICATIONS
| Engine Type |
2-stroke, Air Cooled |
| Displacement |
94 cc (5.7 cu-in) |
| Horsepower |
4.8 kW (5 hp) @ 9,000 rpm |
| Torque |
5.7 Nm (50.4 in-lbs) @ 7,200 rpm |
| Engine Speed |
9,300 +/- 150 rpm (max) / 2,700 - 100 rpm (Idle) |
| Chain Speed at Maximum Power |
28 m/s (5500 ft /min) |
| Weight |
9.5 kg (21 lbs) powerhead only |
| Dimensions |
46 cm (18 in) length / 36 cm (14 in) height / 30 cm (12 in) width |
| Starter |
Dust and water resistant |
| Ignition |
Special water resistant electronic ignition |
| Fuel ratio |
2% (50:1) gasoline-to-oil |
| Fuel Capacity |
1 liter (0.26 gallon) |
| Water Supply Requirement |
Minimum: 1.5 bar (20 psi) |
| Water Flow Requirement |
Minimum: 4 lpm (1 gpm) |
| Guaranteed Sound Power Level, Lwa (1) |
115 dB(A) (Kwa=1.0 dB(A)) |
| Equivalent Sound Pressure at the Operator's Ear Lwa |
104.6 dB(A) (K = 1.0 dB(A)) |
| Vibration, ahv eq Concrete Cutting (2) |
3.6 m/s2 (K=1.0 m/s2) Front Handle / 3.1 m/s2 (K=1.0 m/s2) Rear Handle |
